Acqua Fiber

As a premium transparent paint made from 100% acrylic polymer, Aqcua Fiber is available in the following package sizes 1 Liter which is highly flexible for a variety of needs, from large-scale projects to day-to-day tasks.

Milan Aqcua Fiber comes in several color options to suit a variety of needs and create an elegant decorative look, including:

• Walnut Brown
• Cherry
• Rosewood

Aqcua Fiber is a special transparent coating for fiber cement boards that provides maximum protection for all buildings thanks to its advantages, such as:

1. Making fiber-cement panels look like natural wood

2. Protecting and enhancing the appearance of fiber-cement surfaces

3. Weather-resistant for interior and exterior applications

4. Anti-moss and anti-fungal

5. Alkali-resistant

6. Environmentally friendly and safe for your health

7. Strong adhesion and a professional finish

Milan Aqcua Fiber’s guide to using fiber-cement board paint covers everything from dilution and preparation to application on the material. Here are the complete steps.

How to Dilute Acqua Fiber

To achieve optimal application results, dilute the product according to the application method:

• 30–40% Clean Water for application with a brush
• 30–40% Clean Water For applications using a spray gun

Pre-Application Preparation Phase

Before applying the coating, make sure the substrate surface has been properly prepared to ensure the best possible finish:

1. Make sure the fiber-cement surface is clean, dry, and free of dust.

2. Make sure there is no oil, moss, mold, or other debris on the surface.

3. Use fine-grit sandpaper as needed to achieve a smoother surface.

4. Ensure that the application temperature is approximately 25–30°C with a maximum humidity of 80%.

Acqua Fiber Application Steps

Here are the steps for using Acqua Fiber correctly to achieve the best results.

1. Dilute Acqua Fiber with 30–40% of clean water.

2. Stir the product until it is homogeneous before use.

3. Apply evenly using a brush or spray gun.

4. Wait about 1 hour for the first coat to dry.

5. Apply a second coat for a richer color and maximum protection.

6. Let the coating dry completely before use.

Storage Phase

In addition to understanding the instructions for use, you also need to know the proper storage procedures for paint products to ensure their quality is maintained, by:

1. Clean the applicator with clean water after use.

2. Store the product in a tightly sealed container.

3. Store in a cool, dry place.

4. Keep out of direct sunlight.

5. Keep out of the reach of children.

Video Tutorial on How to Use Acqua Fiber

If the instructions above are still confusing, don’t worry—you can follow the steps for applying Acqua Fiber fiber-cement paint in the video tutorial below.

Do

✅ Prepare the substrate surface thoroughly before application.

✅ Make sure the surface is smooth, clean, and free of dust or oil.

✅ Use clean water according to the recommended dilution ratio.

✅ Stir the product thoroughly before use.

✅ Follow the application steps as recommended.

✅ Use clean and appropriate tools.

✅ Let each coat dry completely before applying the next one.

✅ Store the product in a tightly sealed container after use.

Don’t

❌ Do not apply the coating to a wet or damp substrate.

❌ Do not apply the product when the temperature and humidity do not meet the recommendations.

❌ Do not apply the coating too thickly in a single coat.

❌ Do not mix the product with any other ingredients not recommended.

❌ Do not use dirty tools.

❌ Do not apply the next coat until the first coat is completely dry.

❌ Avoid using dirty water for mixing, as it can affect the application results.

❌ Avoid working on the same spot repeatedly, as this can result in uneven results.